Pinouts >  Интерфейсы цифровых видео и фотокамер  >  Canon pinouts
3 pin N3 Canon plug схематический вид разъема
Разъем 3 pin N3 Canon plug
at the Canon cable
with N3 connector. The connector may be obtained from wired remote control


 

Pin
Number
Pin
Name
Description
3 GND Ground
2 FOCUS short to pin 3 to focus Canon camera
1 SHUTTER short to pin 3 to trigger shutter

If the camera is in stand-by mode, there is a 3.3V voltage present at the focus wire. The camera can be waken up from stand-by by connecting the focus wire to ground. The trigger inputs can serve as power supply for circuits with a supply current of less than 30µA.

На эту распиновку есть 1 отзыв(а): 1 положительных и 0 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации: http://www.doc-diy.net/photo/eos_wired_remote/
Copyright © 2000-2019 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.