Pinouts >  Различные устройства  >  Epson pinouts
8 pin mini-DIN male connector layout
Разъем 8 pin mini-DIN male
EPSON Film Adapter EU-33 pinout colours

 

Pin
Number
Pin
Name
Description
1 Empty Not used
2 GND Red Wire - Connected to Yellow wire on PCB 0 volts
3 +24v Black Wire - Connected to +24v Input on PCB
4 Empty Not used
5 GND Yellow wire - Connected to Red wire on PCB - 0 vots
6 Switch On/Off Switch - normally open when OFF
7 Switch On/Off Switch - shorted to pin 6 when ON
8    

I have taken the unit apart to get this information and just chopped off the plug since I did not have a suitable connector for it.  The wires into the plug are all coloured as above so you can apply 24v between the Black wire (+ve) and red or yellow (-ve).  The switch is not connected inside the unit but is used to tell the scanner to turn on the 24v.  I joined the Black and Brown wires together and applied 24v to the Orange (+ve) and Red+Yellow (-ve) so the switch now works.

На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings