Pinouts >  GPS receivers connectors  >  Lowrance pinouts

7 pins connector at the bottom of the unit
Signal and audio for the iFinder PhD, H2O, Hunt, and other units.
The pinout should fit 3 devices/models. Click to list>
bottom of the unit Pin Pin
Name		 Description
1 ext. power 3.3v externally regulated. DO NOT FEED WITH 12 VOLTS!
2 serial in RS232 data, connect straight to PC com port
3 serial out RS232 data, connect straight to PC com port
4 ground signal ground
5 headphone select ground this pin to disable internal beeper and send audio out connector instead
6 left audio for the firmwares mp3/ogg player, of course
7 right audio and the waypoint voicenote feature, too

The PC-DI7 cable uses four pins, but doesnt bring out the audio connections for simultaneous use as an audio player.

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Lowrance iFinder cable visual pinout:click to enlarge
Copyright © 2000-2025 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings