Pinouts >  GPS receivers connectors  >  Navigon pinouts
5 pin Mini-USB type B plug connector layout
5 pin Mini-USB type B plug connector
at the cable
Wiring diagram pinout for Navigon GPS charge and concurrent use
The pinout should fit 4 devices/models. Click to list>
Pin Pin
Name		 Description
1 +5V 5 Volts Direct Current
2 Data floating/Not connected
3 Data floating/Not connected
4 Ident Conneted to Pin 4 (GND) as pure short, no resistor
5 Ground Ground, shorted to pin X

Use of standard mini-b will place unit in Data Exchange/Synchronization mode. Use of mini-b with a 4-x pure short will allow use of Navigation software and concurrent charging. USB power source must be 1000 ma or above.

Pinout status: +8 -0
According to 8 reports in our database (8 positive and 0 negative) the Navigon 7100, 7110, 5100, 5110, 2100 charger pinout should be correct.

Is this pinout
NO DIY devices
Navigon 7100, 7110, 5100, 5110, 2100 charger visual pinout:click to enlarge
Copyright © 2000-2025 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings