GPS receivers connectors  > NaviLock pinouts
Pin Pin
1 GND (black) Ground signal for power and data
2 VCC +5V (red) Power supply voltage to GPS +5V
3 Data TTL Rx (blue) Data to GPS, TTL levels
4 Data RS-232 RX (white) Data to GPS, RS-232 levels
5 Data RS-232 TX (green) Data from GPS, RS-232 levels
6 Data TTL TX (yellow) Data from GPS, TTL levels

Please note that numbering in some official sources is different!

NaviLock GPS cable pinout, 4800bps, no parity, no flow control

For Navilock NL-303p: pin 6 = nc, pin 3 = shield

6 pin mini-DIN male (PS/2 STYLE) connector layout
6 pin mini-DIN male (PS/2 STYLE) connector
According to 5 reports in our database (2 positive and 1 negative) this pinout should be correct.

Is this pinout
NaviLock MD6 NMEA0183 GPS connector visual pinout:
NaviLock MD6 NMEA0183 GPS connector diagram
click to enlarge
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.