Pinouts >  GPS receivers connectors  >  Garmin pinouts
4 pin Rino proprietary connector layout
4 pin Rino proprietary connector
at the data cable, towards GPS unit
The pinout should fit 3 devices/models. Click to list>
Pin Signal Description
1 Power in 4.5 VDC, 0.5A max
2 Data in RS232 Rx
3 Data out RS232 Tx
4 GND  
This is the pinout of the connector on the cable, NOT on the GPS unit itself. May be connected directly to PC serial port.
 
See page 105 of http://www8.garmin.com/manuals/Rino120_OwnersManual.pdf
Pinout status: +3 -0
According to 3 reports in our database (3 positive and 0 negative) the Rino 110, 120, 130 GPS port pinout should be correct.

Is this pinout
NO DIY devices
Rino 110, 120, 130 GPS port visual pinout:click to enlarge
Source(s) of this and additional information: , http://www8.garmin.com/manuals/Rino120_OwnersManual.pdf
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings