Pinouts >  Videogames connectors  >  Nintendo pinouts
12 pin SNES EDGE proprietary connector layout
12 pin SNES EDGE proprietary connector
at the SNES
Available on the Nintendo SNES
The pinout should fit 1 devices/models. Click to list>
Pin Name Description
1 R Red (Requires 200 uF in series)
2 G Green (Requires 200 uF in series)
3 CSYNC Composite Sync
4 B Blue (Requires 200 uF in series)
5 GND Ground
6 GND Ground
7 Y S-Video Y
8 C S-Video C
9 CVBS Composite Video (NTSC)
10 +5V +5 VDC
11 L+R Left+Right Audio (Mono)
12 L-R Left-Right Audio (Used to calculate Stereo)
 
Pinout status: +3 -0
According to 3 reports in our database (3 positive and 0 negative) the Nintendo SNES Video pinout should be correct.

Is this pinout
NO DIY devices
Nintendo SNES Video visual pinout:click to enlarge
Source(s) of this and additional information: Video Games FAQ (Part 3), Pinout from Radio Electronics April 1992 ;, from Hardware Book ; Deathskull Labs
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings