Pinouts >  Распиновки разъемов винчестеров других устройств хранения информации

The micro SATA connector (sometimes called uSATA or μSATA) defined by SATA 2.6 specification, and is intended for 1.8-inch (46 mm) hard disk drives. The micro data connector is slightly thinner than the standard  SATA data connector.

SATA micro pinout diagram

Pin Name Function
A1 GND Ground
A2 A+ Transmit+
A3 A- Transmit-
A4 GND Ground
A5 B- Receive-
A6 B+ Receive+
A7 GND Ground
B1 +3.3V 3.3V Power
B2 +3.3V 3.3V Power
B3 GND Ground
B4 GND Ground
B5 +5V 5V Power
B6 +5V 5V Power
B7   Reserved
B8   Vendor specific
B9   Vendor specific
На эту распиновку есть 1 отзыв(а): 1 положительных и 0 отрицательных.

Эта распиновка
This page contain parts under Copyright © 2000-2019 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.