Pinouts >  Headsets, Headphones, Handsfree - mobile phones and other equipment  >  HTC pinouts
4 pin 3.5mm (2.5mm) plug connector layout
4 pin 3.5mm (2.5mm) plug connector
at the headset cable (with an addition sleve)
The pinout should fit 4 devices/models. Click to list>

Plug 

Pin Signal Description
1 (Tip) Left ear  White
2 (Ring 1) Right ear  Red
3 (Ring 2) Mic/Switch 1 (Answer Call)  Blue
4 (Sleeve) Ground  Copper
not drawn (Outer Sleeve Ring) Switch 2 (End Call)   
There are two buttons on the remote: one for pickup and one for hangup.
Pinout status: +2 -0
According to 2 reports in our database (2 positive and 0 negative) the O2 Xda II , QTEK 2020, SPV M1000, Dopod 696 (all Himalaya) headphone / headset / handsfree pinout should be correct.

Is this pinout
NO DIY devices
O2 Xda II , QTEK 2020, SPV M1000, Dopod 696 (all Himalaya) headphone / headset / handsfree visual pinout:click to enlarge
Source(s) of this and additional information: wiki.xda-developers.com
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings