Pinouts >  Headsets, Headphones, Handsfree - mobile phones and other equipment  >  Palm pinouts
4 pin 3.5mm (2.5mm) plug connector layout
4 pin 3.5mm (2.5mm) plug connector
at the PalmOne Tungsten C
4-Connector Jack on PalmOne?s Tungsten C. Speaker is Mono. Connect Micro direct to Pin 2 and 4, and also a Button in Line with a 48 Ohm Resistor.
The pinout should fit 1 devices/models. Click to list>
PalmOne Tungsten C Pin Pin
Name		 Description
1 Speaker + Earspeaker (Mono) +
2 Microphone + Microphone (and Button over 48E, and also a Diode)
3 Speaker - Earspeaker (Mono) -
4 Ground Ground, 0V

 

 
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
PalmOne Tungsten C Headphone Jack with Microphone visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings