Pinouts >  Разъемы гарнитур и наушников и т.д.  >  Sanako pinouts
6 pin RJ12 (6P6C) male connector layout
Разъем 6 pin RJ12 (6P6C) male
These connectors are used in headsets manufactured by SANAKO (formerly Tandberg) for use with videoconferencing and in school language labs.

There seems to be several different wire coloring systems (see below)

Pin
Number

Color Description (may be empty)
1 Blue Microphone signal
2 White Right audio channel
3 Red Left audio channel
4 Green Left ground
5 Yellow Right ground
6 Black

Microphone ground

 The pins on this headset use the same levels as a regular microphone and pair of stereo headphones; a simple adapter can be made using two 3.5mm barrel connectors.

On the headsets I have here the pinout is:

White & Green = common (ground)

Black = right audio

Red = left audio

Blue = mic. ground

Yellow = +ve voltage AND mic. audio

-----------------------------------------------------------------------------------------------------------------------------

Added 28.08.2015:

Pin
Number

Color

Version 1 / Version 2

Function
1 Yellow / Red Microphone
2 Blue / Shield Microphone Common
3 Red / Yellow Left speaker
4 Green / Green Speaker common
5 Black / Grey Right speaker
6 White / Brown Speaker common


Functions determinded by schematic of the wiring board inside the headphones (mic side).

На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Источник(и) этой и дополнительной информации: http://hh2k.homelinux.org/blog/archive/2008/07/14/tandberg-educational-headset.aspx
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings