Pinouts >  Keyboard, Mouse and other input devices cables and adapters scheme  >  ATEN pinouts
9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the PC-side cable
RS232 TO RJ11, UPGRADE FIRMWARE CABLE FOR ATEN KVM SWITCHES. This is for the CS-175, cs-1732a, CS1924M.
The pinout should fit 5 devices/models. Click to list>

 

Device 1
Pin Number		 Device 1
Pin Name		 Direction Device 2
Pin Number		 Device 2
Pin Name		 Description
2 RxD   1    
3 TxD   2    
7 RTS   3   may be N/C
5 GND   4    

After 1-2 minutes, Aten closes the port. If you want to control the device through a computer or other devices (for example Crestron CP2E) and be sure that the device will execute the command. 1. The OPEN command (to open the port) 2. Next, a command for the device (for example, sw i01)

4 pin RJ11 male connector layout
4 pin RJ11 male connector
at the ATEN-side cable
Pinout status: +16 -0
According to 17 reports in our database (16 positive and 0 negative) the ATEN KVM Switches Firmware upgrade cable pinout should be correct.

Is this pinout
NO DIY devices
ATEN KVM Switches Firmware upgrade cable visual pinout:click to enlarge
Copyright © 2000-2025 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings