Input devices (keyboards, mices, joysticks)

Combo  Keyboard/Mouse cable for devices (like a multimedai keyboard, or dual-device wireless reciever) that has both functions.


Port PS/2 Pin Name Dir Description Header Pin
KeyBoard 1 DATA <-> Key Data 6
2 n/c - Not connected -
3 GND --- Gnd 4
4 VCC --> Power , +5 VDC 5
5 CLK --> Clock 7
6 n/c - Not connected -
Mouse 1 DATA <-> Button/Pos Data 2
2 n/c - Not connected -
3 GND --- Gnd 4
4 VCC --> Power , +5 VDC 3
5 CLK --> Clock 1
6 n/c - Not connected -

Note: Direction is Computer relative Device. Port Grounds are shared,  Power is not shared(for device connection dection)

This Header Pin is based off a RFKB0102 (Yahoo! 23202 wireless multimedia keyboard with integraded mouse) cable


6 pin mini-DIN male (PS/2 STYLE) connector layout
6 pin mini-DIN male (PS/2 STYLE) connector
at the PC end (two conectors)

at the Device (use 7pin SIP header)
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Dual PS/2 (Keyb+Mouse) visual pinout:
Dual PS/2  (Keyb+Mouse) diagram
click to enlarge
Source(s) of this and additional information: RFKB0102 reciver
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.