Pinouts >  Memory slots and cards connectors
17 pin CFAST connector layout
17 pin CFAST connector
at the CARD

 

Pin
Number		 Pin
Name		 Description
S1   SGND   SATA GND
S2   A+  SATA HOST signal pair A +
S3   A-  SATA HOST signal pair A -
S4  SGND   SATA GND
S5   B-   SATA HOST signal pair B -
S6   B+   SATA HOST signal pair B +
S7   SGND   SATA GND
KEYING
PC1  CDI   CARD detect input on the card
PC2   GND   Device GND
PC3   TBD  To Be Discussed (reserved)
PC4   TBD  To Be Discussed (reserved)
PC5   TBD  To Be Discussed (reserved)
PC6   TBD  To Be Discussed (reserved)
PC7   GND  Device GND
PC8   LED1  LED output on card
PC9   LED2  No Connect
PC10   IO1  Reserved IO  (Write Protect, if enabled)
PC11   IO2  Reserved IO
PC12   IO3  Reserved IO
PC13  PWR  +3.3V
PC14  PWR  +3.3V
PC15   PGND  Power GND
PC16   PGND  Power GND
PC17   CDO  Card detect CMOS output from the card

 

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
1 Information source(s)
CFAST card visual pinout:click to enlarge
Source(s) of this and additional information: http://www.vikingtechnology.com/uploads/cfast_datasheet.pdf
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings