Pinouts >  Motherboard connectors  >  HP pinouts
HP ML350 G6 Motherboard Fan Connector Pinout

Pinout for the motherboard fan connector of an HP ML350 G6 server

Pin
Number
Pin
Name
Description
 1 (Green)   PWM   PWM Signal 
 2 (Yellow)   RPM   Fan Tachometer 
 3 (Red)   +12V   Fan Power 
 4 (Black)   Ground   Fan Ground 
 5 (Black)   Sensor   HP Installation Sensor 

Note:

Pin 5 is looped back to pin 4 and is required to install aftermarket fans in this server. Without this, the server will throw a self-test error and refuse to boot because it will detect a cooling solution failure.

There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
HP ML350 G6 Motherboard Fan Connector visual pinout:
HP ML350 G6 Motherboard Fan Connector diagram
click to enlarge
Copyright © 2000-2019 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.