Pinouts >  Распиновки разных разъемов на материнской плате
10 pin IDC male connector layout
Разъем 10 pin IDC male
Intel HD Audio analog front panel dongles can support up to two analog audio jacks, each of which signals user connection, or disconnection.

 

Pin
Number
Pin
Name
Description
1   PORT 1L   Analog Port 1 - Left channel (Microphone) 
2   GND   Ground
3   PORT 1R   Analog Port 1 - Right channel (Microphone) 
4   PRESENCE#    Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected. 
5   PORT 2R   Analog Port 2 - Right channel (Headphone) 
6   SENSE1_RETURN   Jack detection return for front panel (JACK1) 
7   SENSE_SEND    Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network 
8   KEY   No pin
9   PORT 2L   Analog Port 2 - Left channel (Headphone) 
10   SENSE2_RETURN   Jack detection return for front panel (JACK2) 

Consult the "Front Panel I/O Connectivity Design Guide", p. 22 for more details

На распиновку Intel High Definition Audio connector есть 3 отзыв(а): 3 положительных и 0 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации: http://www.formfactors.org/developer/specs/A2928604-005.pdf
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings