Pinouts >  Network hardware interfaces  >  Cybertec pinouts
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the Cybertec modem DCE port
Male DE-9 to Male RJ45 cable. Used to connect Cybertec 2155 and 2255 DCE modem ports to Cisco Console connections

 

Device 1
Pin Number		 Device 1
Pin Name		 Direction Device 2
Pin Number		 Device 2
Pin Name		 Description
1 DCD Output      
2 RX Input 3 TX Output
3 TX Output 6 RX Input
4 DTR Input 2 DSR Output
5 GND Ground 5 GND Ground
6 DSR Output 7 DTR Input
7 RTS Input 8 CTS Output
8 CTS Output 1 RTS Input
9 RI Output      

Omitted pins are Not Connected.

8 pin RJ45 (8P8C) male connector layout
8 pin RJ45 (8P8C) male connector
at the Cisco Router/Switch
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings