Pinouts >  Распиновки кабелей и разъемов оборудования торговой точки: сканнеров, принтеров, касс  >  NCR pinouts
9 pin D-SUB male connector layout
Разъем 9 pin D-SUB male
This is the cable connector for NCR powered serial connector, as found on the realpos series.

Pin
Number

Pin
Name
Description (may be empty)
1 DCD  
2 TX  
3 RX  
4 DTR  
5 GND  
6 DSR  
7    
8    
9 +12V  +12V if 1,4 and 6 are shorted

PC toggles a bit on the DTR line and check the DSR and DCD lines. If the lines are shorted, pin 9 (normally RI) is used to provide 12V power. See patent for more information

На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Источник(и) этой и дополнительной информации: http://www.google.com/patents?id=L0QPAAAAEBAJ&printsec=abstract&zoom=4&dq=6651177+patent
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings