ATX, WTX and other standard and proprietary power supply (PSU) cables connectors  > DELL pinouts
Power Supply Model HP-150SS / PS-5231. The plug is an ATX 20 pin plug, but it's incompatible with ATX standards (different pinout, no 3.3V)


1 +5V  
2 GND  
3 +5V  
4 GND  
5 PG +5V when power good
6 +5V STB Stand-by power
7 +12V  
8 -12V  
9 GND  
10 GND  
11 PWR_ON Connect to ground to power on
12 GND  
13 GND  
14 GND  
15 -5V  
16 +5V  
17 +5V  
18 +5V  
19 TFSC Thermal Fan Speed Control.
20 +5V  

Cable colors may differ between power supplies, even within the same revision!

TFSC - Mainboard puts 0.7 - 1.4V there to control voltage supplied to power supply's fan (fan voltage increases when TFSC increases).

Almost the same with DELL ATX power supply pinout

20 pin MiniFit Jr 5566-20 male (MOLEX 39-29-9202) connector layout
20 pin MiniFit Jr 5566-20 male (MOLEX 39-29-9202) connector
at the Mainboard
According to 2 reports in our database (1 positive and 1 negative) this pinout may be incorrect.

Is this pinout
Dell Optiplex Power Supply Connector visual pinout:
Dell Optiplex Power Supply Connector diagram
click to enlarge
Source(s) of this and additional information: My measurements
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.