Also for Dell Dell T5500 T5400 T7400 T3400 (H875E-00, N875EF-00, NPS-875AB/875BB, H875EF-00, H875P-00, N875E-00) ?
| Pin Number |
Pin Name |
Description |
|---|---|---|
| 1 | A1 | GND (Black) |
| 2 | A2 | +5V (Red) |
| 3 | A3 | GND (Black) |
| 4 | A4 | GND (Black) |
| 5 | A5 | Empty |
| 6 | A6 | +12V(B) (White) |
| 7 | A7 | GND (Black) |
| 8 | A8 | +12V(E) (Blue-Yellow) |
| 9 | A9 | +12V(A) (Yellow) |
| 10 | A10 | +12V(A) (Yellow) |
| 11 | A11 | +12V(C) (Blue-White) |
| 12 | B1 | GND (Black) |
| 13 | B2 | +3.3V (Orange) |
| 14 | B3 | GND (Black) |
| 15 | B4 | Empty |
| 16 | B5 | Empty |
| 17 | B6 | +12V(C) (Blue-White) |
| 18 | B7 | GND (Black) |
| 19 | B8 | +12V(E) (Blue-Yellow) |
| 20 | B9 | +12V(B) (White) |
| 21 | B10 | +12V(B) (White) |
| 22 | B11 | +12V(C) (Blue-White) |
| 23 | C1 | GND (Black) |
| 24 | C2 | GND (Black) |
| 25 | C3 | GND (Black) |
| 26 | C4 | GND (Black) |
| 27 | C5 | GND (Black) |
| 28 | C6 | Empty |
| 29 | C7 | GND (Black) |
| 30 | C8 | GND (Black) |
| 31 | C9 | Empty |
| 32 | C10 | +12V(A) (Yellow) |
| 33 | C11 | Empty |
| 34 | D1 | GND (Black) |
| 35 | D2 | GND (Black) |
| 36 | D3 | GND (Black) |
| 37 | D4 | GND (Black) |
| 38 | D5 | Empty |
| 39 | D6 | Empty |
| 40 | D7 | Empty |
| 41 | D8 | +5V (Red) |
| 42 | D9 | +5V (Red) |
| 43 | D10 | +12V(C) (Blue-White) |
| 44 | D11 | +12V(D) (Yellow-White) |
| 45 | E1 | GND (Black) |
| 46 | E2 | GND (Black) |
| 47 | E3 | GND (Black) |
| 48 | E4 | GND (Black) |
| 49 | E5 | +3.3V (Orange) |
| 50 | E6 | Power Ok is a status signal generated by the power supply to notify the computer that the DC operating voltages are within the ranges required for proper computer operation (+5 VDC when power is Ok) (Gray) |
| 51 | E7 | Power Supply On (active low). Short this pin to GND to switch power supply ON, disconnect from GND to switch OFF. (Green) |
| 52 | E8 | +3.3V (Orange) |
| 53 | E9 | +3.3V (Orange) |
| 54 | E10 | +5V (Red) |
| 55 | E11 | +12V(D) (Yellow-White) |
| 56 | F1 | GND (Black) |
| 57 | F2 | GND (Black) |
| 58 | F3 | GND (Black) |
| 59 | F4 | Empty |
| 60 | F5 | -12V (Blue) |
| 61 | F6 | Empty |
| 62 | F7 | Sensing wire for 3.3V regulation (Brown) |
| 63 | F8 | +3.3V (Orange) |
| 64 | F9 | +5 VDC Standby Voltage (max 10mA) 500mA or more typical (Purple) |
| 65 | F10 | +5V (Red) |
| 66 | F11 | +12V(D) (Yellow-White) |
correct
incorrect