Pinouts >  ATX, WTX and other standard and proprietary power supply (PSU) cables connectors  >  HP pinouts
3W3 Sub-D connector for high-current applications


Description Gender
@ Cable
1 0V Supply return M F
2 GND Ground F M
3 -48V 48 volt negative supply M F

If you only have 2 power cables at your disposal, and you're sure that you're dealing with a positive ground system; you can just make a short between pins 1 and 2.

The connector is a high-power version of the 15-pin Sub-D housing. It can be found at all major component suppliers; do a search for "3W3", and you'll probably end up with plenty of results. Some manufacturers sell these as complete connectors, other (FC T) offer empty shells where you can add male or female connector pins.

3 pin Sub-D 3W3 male connector layout
3 pin Sub-D 3W3 male connector
at the PSU
3 pin Sub-D 3W3 female connector layout
3 pin Sub-D 3W3 female connector
at the cable
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
HP Proliant servers -48V DC Power inlet visual pinout:
HP Proliant servers -48V DC Power inlet diagram
click to enlarge
This page contain parts under Copyright © 2000-2019 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.