Pinouts >  RS-232 and other serial ports and interfaces

unknown connector
TIA/EIA-562 is a very similar to TIA/EIA-232-F with data rates up to 64 kbps supported.

TIA/EIA-562 is an electrical only standard. It"s not complete standard and intended to be referenced by complete standards, such as TIA/EIA-561. No pinout available. TIA/EIA-562 standard defines an unbalanced, unidirectional, point-to-point interface, with support of inter-operability with TIA/EIA-232-F devices.

Driver Loaded Output Voltage (Min. Level) ≥ | 3.3V |
Driver Open Circuit Output Voltage ≤ | 13.2V |
Driver Loaded Output Voltage (3 kΩ) ≥ | 3.7V |
Driver Short Circuit Current ≤ | 60 mA |
Driver Transition Time Controlled
Maximum Driver Slew Rate ≤ 30 V/μs
Driver Output Resistance (Power Off) ≥ 300Ω
Receiver Input Resistance 3 kΩ to 7 kΩ
Maximum Receiver Input Voltage ?25V
Receiver Thresholds ?3V

There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Source(s) of this and additional information: "Summary of Well Known Interface standards" by National Semiconductor
Copyright © 2000-2022 by team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.