Pinouts >  Распиновки последовательных портов
25 pin D-SUB male connector layout
Разъем 25 pin D-SUB male
Pin Function Description Circuit EIA
1unused
2Digit PresentA signal given to the ACE indicating that the digit lines contain a digitDPR
3Abandon Call and RetryAn indicator signal from the ACE that it could not make a connection. Could be "busy".ACR
4Call RequestA signal from the DTE that tells the ACE to go "off hook"CRQ
5Present Next DigitA signal from the ACE to the DTE to indicate that the ACE is ready to receive the next digit.PND
6unused
7unused
8unused
9unused
10unused
11unused
12unused
13Distant Station ConnectedIndicator from ACE to DTE that the call is succesfully made.DSC
14-17Digit Signal CircuitsFour lines containing a parallel BCD dial digit (10 digits, plus control digits)NB1-NB8
18unused
19unused
20unused
21unused
22Data Line OccupiedAn indicator that is used by the ACE to let the DTE know that the line it wants to use is used by another device.DLO
23unused
24unused
25unused
25 pin D-SUB female connector layout
Разъем 25 pin D-SUB female
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Источник(и) этой и дополнительной информации: RS366 Page at Connectivity Knowledge Platform (Made IT)
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings