Pinouts >  UPS devices  >  Tripp-lite pinouts
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the computer
Part# 73-0724 (BC, Internet Office, OmniSmart UPS). Should work with PowerAlert software.
The pinout should fit 4 devices/models. Click to list>
UPS
Signal Name		 DB-9 Male
(UPS end)		 DB-9 Female
(PC end)		 PC
Signal Name
Ground 1 3  
AC Fail 5 8 CTS
LOW BATT 6 1 DCD
Inverter shutoff- 4 5 GND
Inverter shutoff+ 2 7 this wire includes one 1N4148 or 1N4149 diode |<

Two 10 k resistors present DB9F 8-4, 4-1. Pin 4 at the PC end (DTR) connected by R1 10kOhm to pin 8 (CTS) and by R2 10kOhm to pin 1(DCD)

PC End

1 - Black

3 - Brown

5 - Orange

7 - Red

8 - Yellow

Cover - Bare Metal

9 pin D-SUB female connector layout
9 pin D-SUB female connector
Pinout status: +0 -0
According to 1 reports in our database (0 positive and 0 negative) the Tripp-lite OmniPro-450 (675) PowerAlert Cable pinout may be incorrect.

Is this pinout
NO DIY devices
Tripp-lite OmniPro-450 (675) PowerAlert Cable visual pinout:click to enlarge
Source(s) of this and additional information: www.networkupstools.org
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings