Pinouts >  UPS devices  >  Tripp-lite pinouts
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the UPS
Should work with Windows NT UPS Service
The pinout should fit 2 devices/models. Click to list>
UPS
Signal Name		 DB-9 Male
(UPS end)		 DB-9 Female
(PC end)		 PC
Signal Name
Shutdown 2 4 DTR
PWR Fail 5 8 CTS
LOW BATT 6 1 DCD
Common 1,4 5 GND

Pin 7 at the PC end (RTS) connected by R1 2k0 to pin 8 (CTS) and connected by R2 2k0 to pin 1(DCD)

Power_Failure - Negative, Low_Battery - Negative, UPS_Shutdown - Positive.
9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the computer
Pinout status: +1 -0
According to 1 reports in our database (1 positive and 0 negative) the Tripp-lite OmniPro-450 (675) WinNT Cable pinout should be correct.

Is this pinout
NO DIY devices
Tripp-lite OmniPro-450 (675) WinNT Cable visual pinout:click to enlarge
Source(s) of this and additional information: UPS FAQ in russian
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings