Hardware pinouts information and cables schemes

HP Compaq ProLiant ML310 G1 Case Fan specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 6 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
2012-01-18 03:58:21rev. 1CORRECTNo errors, used this successfully to replace the noisy System Fan Assembly with a normal fan on a ML330 g2 or g3.APPROVED
2013-02-23 08:03:32rev. 1CORRECTAPPROVED
2013-04-11 23:02:18rev. 1CORRECTAPPROVED
2014-06-25 20:23:10rev. 2ERROR FIXEDThe solution mey be correct for G1 fans. I have tried it on a G5 server with 5pin CPU connectors letting pin 5 open. System complains on boot: Fan solution not sufficient. This means, that pin 5 has to be connected, but I do not know what has to be connected there.APPROVED
2016-08-08 20:39:46rev. 2CORRECTAPPROVED
2016-08-08 22:13:26rev. 2CORRECTit seems that the pin 5 is a low/high speed switch, not really a pwm, 0v to 2.5v high speed 2.5v to 5v low speed !APPROVED


History of users contributions

Date Content
Revision
Author Comment

Back to HP Compaq ProLiant ML310 G1 Case Fan pinout


Pinouts.ru > Pinout of HP Compaq ProLiant ML310 G1 Case Fan
should be correct