Hardware pinouts information and cables schemes

Kenwood Head Unit Auxilliary Input (CA-C1AUX) specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 12 approved reports in our database

Date Content
User opinion Comment Approved by moderator?
ERROR FIXEDIn th etable of pin outs the last column is inconsistent with the first column - in the instance of Rh chanel and ground.APPROVED
CORRECTWorks fine. DIN 13 pin # diagram can be found here:
ERROR FIXEDThe pins to connect whit the 10 Kohm are the nAPPROVED
2008-12-24 23:00:23rev. 2CORRECTIt is fine, bought cable from ebay and the pins match up to the diagram. The bottom pin that is outside the grid of 12 pins is the 13th pin. With the pins facing you the bottom right is pin 12 (left in).APPROVED
2009-10-12 00:39:24rev. 4ERROR FIXEDthere is something wrong with the pins there should be 4 in a row and 3 upon and than one in the center below. isn't it right?APPROVED
2010-02-21 19:24:53rev. 4ERROR FIXEDThere are 4 pins in rows and 3 in columns **** **** **** *APPROVED
2010-05-01 17:06:13rev. 4ERROR FIXEDThis document and http://pinoutsguide.com/Home/kenwood_cd_changer_pinout.shtml contain the right information if you ignore the image of the connector, and use this image instead: http://www.universal-radio.com/catalog/parts/0954.html Then the numbers correspond, and you can get your CA-C1AUX working.APPROVED
2012-11-30 01:21:38rev. 4INCORRECTDescription, ground and right+ are wrongAPPROVED
2016-12-01 06:55:39rev. 4CORRECTAPPROVED
2017-04-23 19:00:13rev. 4CORRECTAPPROVED
2019-09-26 00:00:25rev. 5CORRECTAPPROVED
2022-03-23 03:16:35rev. 5CORRECTCorrect pinout for Kenwood CA-C1AX cableAPPROVED

History of users contributions

Date Content
Author Comment
2009-08-17 18:22:01rev. 4rafi
2010-01-07 14:43:19rev. 4
2010-08-12 09:43:49rev. 4John Kwords were mixed up
2010-08-15 20:31:25rev. 4Lucifer
2011-10-04 21:10:29rev. 4
2022-02-01 08:50:06rev. 5

Back to Kenwood Head Unit Auxilliary Input (CA-C1AUX) pinout

Pinouts.ru > Pinout of Kenwood Head Unit Auxilliary Input (CA-C1AUX) and layout of connector and 2 pin RCA plug connector
should be correct