Pinouts >  Aftermarket automotive Head units and Car Stereo  >  Kenwood pinouts
13 pin CD Changer proprietary connector layout
13 pin CD Changer proprietary connector
at the kenwood cd changer
Stereo Line Input to Kenwood head units
13 Pin Female Input Pin
Name		 13 Pin Female Input Pin
Number		 Direction Input Source Pin
Number		 Input Source Pin
Name		 Description
Ground 6 <-- 2 Shield Common Audio Ground
Right + 8 <-- 1 Center Right Audio Input
Left + 12 <-- 2 Center Left Audio Input

On the head unit side, pin 9 is connected to pin 3 via a 10K Ohm resistor, this identifies the type of cable to the head unit.

 
2 pin RCA plug connector layout
2 pin RCA plug connector
at the Input Source
Pinout status: +8 -1
According to 14 reports in our database (8 positive and 1 negative) the Kenwood Head Unit Auxilliary Input (CA-C1AUX) pinout should be correct.

Is this pinout
NO DIY devices
Kenwood Head Unit Auxilliary Input (CA-C1AUX) visual pinout:click to enlarge
Source(s) of this and additional information: http://nodivisions.com/tech/, http://www.mictronics.de/?page=cdc_proto#Kenwood, http://nodivisions.com/tech/kenwood_aux_adapter/
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings