|
PlayStation 2 / 3 Special DSUB VGA Cable specification users reports and reviews |
| Date | Content Revision |
User opinion | Comment | Approved by moderator? |
|---|---|---|---|---|
| 2008-11-29 16:16:39 | rev. 2 | INCORRECT | The VGA connector should be a DB15 connector, not 15-pin dsub (so there are three rows of pins -- not two like the image indicates) | APPROVED |
| 2009-04-27 00:56:36 | rev. 4 | INCORRECT | table says 680k resistor, schematic says 680, which one is right? | APPROVED |
| 2009-08-03 09:02:12 | rev. 7 | INCORRECT | pin 3 is audio ground pin 4 is audio left | APPROVED |
| 2009-08-13 09:19:32 | rev. 7 | INCORRECT | The part about linking PS2 consoles to SoG monitor is totally without meaning. First of all, the SoG signal [Green Signal + Sync Signal (H signal + V signal)] is must be putted on VGA pin 2 (green). The electronics of SoG monitor will do the rest. Anyway it is not necessary, because PS2 console already output video as SoG! | APPROVED |
| 2009-12-24 08:07:11 | rev. 7 | INCORRECT | APPROVED | |
| 2012-07-25 03:13:01 | rev. 9 | CORRECT | It was very usefull for me | APPROVED |
| 2019-06-01 05:48:43 | rev. 9 | CORRECT | APPROVED | |
| 2022-08-30 15:40:37 | rev. 10 | ERROR FIXED | I made my own crappy one once, Pin 5 to VGA 13 makes 480i over RGB/YPbPr work. Maybe needs a resistor to prevent double Luma if pairing Pin 5 & 12 to VGA 13 for all resolution outputs. Svideo luma to VGA H is the correct way. | APPROVED |
| Date | Content Revision |
Author | Comment |
|---|---|---|---|
| 2009-03-01 22:44:46 | rev. 3 | Marcelo sena | |
| 2010-01-14 22:20:46 | rev. 7 | Oleg | My PS2 cable conectors look differ |
| 2010-11-02 21:54:15 | rev. 8 | Salman Aziz | Botb diagram had diffrence now fixed |
| 2011-04-25 21:16:52 | rev. 9 |
Pinouts.ru > Pinout of PlayStation 2 / 3 Special DSUB VGA Cable |
may be incorrect |