Pinouts >  Распиновки кабелей и переходников для клавиатур, мышей и т.д.  >  ATEN pinouts
9 pin D-SUB female connector layout
Разъем 9 pin D-SUB female
RS232 TO RJ11, UPGRADE FIRMWARE CABLE FOR ATEN KVM SWITCHES. This is for the CS-175, cs-1732a, CS1924M.

 

Device 1
Pin Number
Device 1
Pin Name
Direction Device 2
Pin Number
Device 2
Pin Name
Description
2 RxD   1    
3 TxD   2    
7 RTS   3   may be N/C
5 GND   4    

After 1-2 minutes, Aten closes the port. If you want to control the device through a computer or other devices (for example Crestron CP2E) and be sure that the device will execute the command. 1. The OPEN command (to open the port) 2. Next, a command for the device (for example, sw i01)

4 pin RJ11 male connector layout
Разъем 4 pin RJ11 male
На распиновку ATEN KVM Switches Firmware upgrade cable есть 17 отзыв(а): 16 положительных и 0 отрицательных.

Эта распиновка
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings