PDA, Tablet PC, MP3 players and other portable devices
USB 3.0 is the successor of USB 2.0. USB 3 reduces the time required for data transmission, reduces power consumption, and is backward compatible with USB 2.0

 USB 3.0 Micro-B cable plug

USB 3.0 also introduced a new Micro-B cable plug, which consists of a standard USB 1.x/2.0 Micro-B cable plug, with additional 5-pin plug stacked on side of it. That way, USB 3.0 Micro-A host connector preserved its backward compatibility with the USB 1.x/2.0 Micro-B cable plugs. However, it is not possible to plug a USB 3.0 Micro-B plug into a USB 2.0 Micro-B receptacle, due to a physically larger connector.

1 VBUS +5V
2 USB D- USB 2.0 differential pair
3 USB D+ USB 2.0 differential pair
4 OTG ID USB OTG ID for identifying lines
5 GND Ground
6 USB3 SSTX- USB 3.0 signal transmission line
7 USB3 SSTX+ USB 3.0 signal transmission line
8 GND Ground
9 USB3 SSRX- USB 3.0 signal receiving line
10 USB3 SSRX+ USB 3.0 signal receiving line

USB 3.0 receptacles are backward compatible with USB 2.0 connectors.

10 pin micro-B USB 3.0 plug connector layout
10 pin micro-B USB 3.0 plug connector
at the USB cable
According to 3 reports in our database (3 positive and 0 negative) this pinout should be correct.

Is this pinout
Micro-USB 3.0 connector visual pinout:
Micro-USB 3.0 connector diagram
click to enlarge
Source(s) of this and additional information: en.wikipedia.org
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinoutguide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.