Pinouts >  Audio / Video hardware connectors  >  Creative pinouts
40 pin IDC male connector layout
40 pin IDC male connector
AD_EXT pinout for Audigy 2 ZS and X-Fi
The pinout should fit 2 devices/models. Click to list>
Pin Pin
Name		 Description
1 +5V  
2 - No pin
3 GND  
4 GND  
5 SPDIF 0 IN SPDIF 0 Input
6 GND  
7 GND  
8 GND  
9 SPDIF 0 OUT SPDIF 0 Output
10 - No pin
11 - No pin
12 - No pin
13 P16VCLK 24.576 MHz clock
14 GND  
15 I2S FrameSync I2S FrameSync
16 GND  
17 I2S BitClock  
18 GND  
19 I2S Input I2S Input to P16V (AUX 2)
20 GND  
21 I2S Input I2S Input to P16V (Line-In 2 / Mic 2)
22 GND  
23 GPO1 GP Output 1
24 GPO2 GP Output 2
25 GPO0 GP Output 0
26 GND  
27 SPDIF 3 OUT SPDIF 3 Output
28 GND  
29 SPDIF 1 OUT SPDIF 1 Output
30 GND  
31 SPDIF 2 OUT SPDIF 2 Output
32 GND  
33 GPI1 GP Input 1
34 to TAD to TAD connector
35 GPI0 GP Input 0
36 ? to pin 10 @ J1
37 UART (MIDI) OUT MIDI OUT
38 GND  
39 UART (MIDI) IN MIDI IN
40 - No pin

This pinout is originally founded by Samir. In Audigy 2 ZS, connecting pins 25 and 35 together will fake Audigy drive. In X-Fi, that trick doesnt work. No work around has been found yet. Cannot get SPDIF IN, I2S Input and MIDI I/O to work without it. SPDIF outs work fine without trick.

Pinout status: +4 -0
According to 4 reports in our database (4 positive and 0 negative) the Creative Sound Blaster Audigy 2 ZS and X-Fi AD_EXT pinout should be correct.

Is this pinout
NO DIY devices
Creative Sound Blaster Audigy 2 ZS and X-Fi AD_EXT visual pinout:click to enlarge
Source(s) of this and additional information: kb.kxproject.lugsoft.com
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings