Pinouts >  Audio / Video hardware connectors  >  Shure pinouts

4 pins connector
Pin
Number		 Pin
Name		 Description (may be empty)
Pin 1 Ground  Says by itself...
Pin 2 Mic Input  (or Audio +)
Pin 3 +5v Bias  
Pin 4 +5v Through 3k Ohm resistor  

These are for EV beltpacks only as each manufacturer has it's own pinout standards for ta4 connectors

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
TA4 TA4F TA4M for EV Electro-Voice Beltpacks visual pinout:click to enlarge
Copyright © 2000-2025 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings