Pinouts >  Lexus and Toyota Car Audio Head units harness  >  Daihatsu pinouts
Pioneer KEH-P3086ZY

Pin function

Power pins

backup Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

Rch+ right speaker out
LCh+ left speaker out
16 pin (10+6) Toyota Head Unit proprietary of Daihatsu 16 pin Car Stereo connector layout
16 pin (10+6) Toyota Head Unit proprietary connector
at the car stereo
11 pins unspecified connector layout
11 pins unspecified connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
This page contain parts under Copyright © 2000-2019 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.