Pinouts >  OEM Lexus and Toyota in-Car Radio and Navigation units  >  Lexus GX470 pinouts
20 pin Toyota Head Unit audio connector layout
20 pin Toyota Head Unit audio connector
at the car stereo
P1814 Pioneer DEX-MG9467ZT, p/n 86120-60800
The pinout should fit 1 devices/models. Click to list>

Pin
Notation		 Pin function

Power pins
BU Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins
FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins
MUTE This pin is used to silence the audio, earthed by some other external components that is connected to the radio.

 

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
2 Information source(s)
Lexus GX470 (2006-2009) Radio Head Unit visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings