Pinouts >  Genuine Lexus and Toyota Car Audio Head units harness  >  Toyota Land Cruiser pinouts
16 pin (10+6) Toyota Head Unit proprietary connector layout
16 pin (10+6) Toyota Head Unit proprietary connector
p/n 8612-60230

Meaning of Head Unit pinout signals

Pin
Notation
Pin function

Power pins

BAT+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
LAMP Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

MUT This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
Amp Amplifier control

 

There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Toyota Land Cruiser Prado (1996) 56009 CQ-TT4650A Head Unit visual pinout:click to enlarge
Copyright © 2000-2021 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.