Pinouts >  Genuine Lexus and Toyota Car Audio Head units harness  >  Toyota Highlander pinouts
20 pin Toyota Head Unit audio connector layout
20 pin Toyota Head Unit audio connector
at the car stereo
p/n 86120-0E250

 

20 pin Main Audio

Pin
Number
Pin Function Details wire color
1 B Battery Always 11 to 14 V B
2 ILL+ Illumination signal Light control switch ON 11 to 14 V, OFF <1V G
5 ATX+ AVC-LAN communication signal Y
7 MUTE MUTE signal switched below 1V V
8 R+ Sound signal (Right)   R
9 L+ Sound signal (Left)   B
10 SLD Body ground Shield ground Always Below 1 V  
11 ACC Accessory (ON) Ignition switch on(ACC) 11 to 14 V GR
12 ILL- Illumination (rheostat) signal Light control switch OFF Below 1 V W
13 ANT Power source of antenna Radio switch ON and AM or FM -> 11 to 14V B
15 ATX- AVC-LAN communication signal  
18 R- Sound signal (Right)   G
19 L- Sound signal (Left)   W
20 GND Ground Body ground BR

 

20 pin Misc connector

Pin
Number
Pin Function Details wire color
6 SWG Steering pad switch ground   B
7 SW1 Steering pad switch signal N/A >=4V
SEEK+ = 0.5 V
SEEK- = 0.9V
VOL+ = 2.0V
VOL-  = 3.4 V
O
8 SW2 Steering pad switch signal N/A >=4V
MODE = 0.5V
ON HOOK = 0.9V
OFF HOOK  = 2.0V
V
11 IVO+ Voice signal Bluetooth handsfree L
12 IVO- Voice signal Bluetooth handsfree P
13 Shield Shield Ground    
15 ARI Sound signal (Right) External device (When stereo jack is used) R
16 ASGN Shield Ground   W
17 ALI Sound signal (Left) External device (When stereo jack is used) B
18 AGND Body ground    
19 AUX1 External device connection detection signal   Y

 

Pin
Number
Pin Function Details wire color
1 MIC- Microphone voice signal Bluetooth handsfree G
2 MIC+ R
3 TSW- Ground   Y
5 +B Battery   B
6 MGND Microphone amplifier power supply Ground   Y
7 MCVD+ Microphone amplifier power supply 4 to 6 V  
14 GND Ground   W-B
16 ACC Accessory (ON) Ignition switch on (ACC) => 11 to 14 V GR

 

Pin
Number
Pin Function Details wire color
1 CSLD Shield Ground    
2 CDR+ RSE Sound Signal (only w/ Rear Seat Entertainment System)   BR
3 CDR-   SB
4 CDL+   LG
5 CDL-   P
6 MUTE   RSE system is playing => Above 3.5 V
RSE system ischanging mode => Below 1 V
B
9 TXM+ AVC-LAN communication signal   Y
10 TXM-   BR

JBL Amplifier 86280-0W280, 86280-0W281, 86280-0W282

20 pin Lexus/Toyota Head Unit accesory proprietary connector layout
20 pin Lexus/Toyota Head Unit accesory proprietary connector
at the head unit
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Toyota Highlander (2008-2010) E7014, E7015 JBL Head Unit visual pinout:click to enlarge
Copyright © 2000-2019 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.