Pinouts >  Genuine Lexus and Toyota Car Audio Head units harness  >  Toyota Land Cruiser pinouts
20 pin Toyota Head Unit audio connector layout
20 pin Toyota Head Unit audio connector
Pioneer DVZ-MG8077zt for Toyota Land Cruser 200 up to 2009, p/n 86120-60870

Meaning of Head Unit pinout signals

Pin
Notation
Pin function

Power pins

B+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

MUTE This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
Amp, ATX+, ATX- Amplifier control
DATA, CLOCK Head unit communication
SDA, SCL, MRQ Head unit communication (information display and so on)
CD-IN L+, CD-IN L-, CD-IN R+, CD-IN R-, CL, CH, IH, CDL, CDR CD-changer audio
SWG Steering wheel control buttons
20 pin Lexus/Toyota Head Unit accesory proprietary connector layout
20 pin Lexus/Toyota Head Unit accesory proprietary connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Toyota Land Cruiser (2007-2009) P6502 Head Unit visual pinout:click to enlarge
Copyright © 2000-2021 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinoutguide.com .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.