Pinouts >  Digital cameras and camcorders interfaces  >  Sony pinouts
3 pin RM-S1AM proprietary connector layout
3 pin RM-S1AM proprietary connector
at the cable
The pinout should fit 42 devices/models. Click to list>

 

Pin
Number		 Pin
Name		 Description
1   GND   Ground
2   Focus  
3   Shutter  

Sony has a rather exotic connector fitting all types. Many modells do not have a remote control connector. Both focus and shutter must be connected to ground to release the camera. Shutter only doesn't work. The connector was invented by Minolta before Sony bought them.


 

Pinout status: +3 -0
According to 3 reports in our database (3 positive and 0 negative) the Sony RM-S1AM shutter release cable connector pinout should be correct.

Is this pinout
NO DIY devices
Sony RM-S1AM shutter release cable connector visual pinout:click to enlarge
Source(s) of this and additional information: http://www.doc-diy.net/photo/remote_pinout/sony_pinout.jpg
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings