Pinouts >  Various Electronic Devices  >  Cisco pinouts
60 pin Cisco DB connector layout
60 pin Cisco DB connector
This document explains the V.35 serial cable assembly and pinouts. Cisco Part#: CAB-V35FC=
60 Pin1 Signal Description Direction 34 Pin Signal
J1-49
J1-48
MODE_1
GND
Shorting group - - -
J1-50
J1-51
MODE_0
GND
Shorting group - - -
J1-53
J1-54
J1-55
J1-56
TxC/NIL
RxC_TxCE
RxD/TxD
GND
Shorting group - - -
J1-46 Shield_GND Single - J2-A Frame GND
J1-45
Shield
Circuit_GND
-
Twisted pair no. 12 -
-
J2-B
Shield
Circuit GND
-
J1-35
Shield
CTS/RTS
-
Twisted pair no. 8 -
-
J2-C
Shield
RTS
-
J1-42
Shield
RTS/CTS
-
Twisted pair no. 9 -
-
J2-D
Shield
CTS
-
J1-43
Shield
DTR/DSR
-
Twisted pair no. 10 -
-
J2-E
Shield
DSR
-
J1-44
Shield
LL/DCD
-
Twisted pair no. 11 -
-
J2-F
Shield
RLSD
-
J1-34
Shield
DSR/DTR
-
Twisted pair no. 7 -
-
J2-H
Shield
DTR
-
J1-33
Shield
DCD/LL
-
Twisted pair no. 6 -
-
J2-K
Shield
LT
-
J1-28
J1-27
RxD/TxD+
RxD/TxD-
Twisted pair no. 5 -
-
J2-P
J2-S
SD+
SD-
J1-18
J1-17
TxD/RxD+
TxD/RxD-
Twisted pair no. 1 -
-
J2-R
J2-T
RD+
RD-
J1-26
J1-25
RxC/TxCE+
RxC/TxCE-
Twisted pair no. 4 -
-
J2-U
J2-W
SCTE+
SCTE-
J1-22
J1-21
NIL/RxC+
NIL/RxC-
Twisted pair no. 3 -
-
J2-V
J2-X
SCR+
SCR-
J1-20
J1-19
TxCE/TxC+
TxCE/TxC-
Twisted pair no. 2 -
-
J2-Y
J2-AA
SCT+
SCT-

Arrows indicate signal direction: - indicates DTE to DCE, and - indicates DCE to DTE.

1 Any pin not referenced is not connected.

 

34 pin V.35 Cisco connector layout
34 pin V.35 Cisco connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Cisco V.35 DCE cable visual pinout:click to enlarge
Source(s) of this and additional information: Cisco Systems, Inc.
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings