Pinouts >  Various Electronic Devices  >  Cisco pinouts
60 pin Cisco DB connector layout
60 pin Cisco DB connector
This document explains the V.35 serial cable assembly and pinouts. Cisco Part#: CAB-V35MT=
60 Pin1 Signal Description Direction 34 Pin Signal
J1-49
J1-48
MODE_1
GND
Shorting group - - -
J1-50
J1-51
J1-52
MODE_0
GND
MODE_DCE
Shorting group - - -
J1-53
J1-54
J1-55
J1-56
TxC/NIL
RxC_TxCE
RxD/TxD
GND
Shorting group - - -
J1-46 Shield_GND Single - J2-A Frame GND
J1-45
Shield
Circuit_GND
-
Twisted pair no. 12 -
-
J2-B
Shield
Circuit GND
-
J1-42
Shield
RTS/CTS
-
Twisted pair no. 9 -
-
J2-C
Shield
RTS
-
J1-35
Shield
CTS/RTS
-
Twisted pair no. 8 -
-
J2-D
Shield
CTS
-
J1-34
Shield
DSR/DTR
-
Twisted pair no. 7 -
-
J2-E
Shield
DSR
-
J1-33
Shield
DCD/LL
-
Twisted pair no. 6 -
-
J2-F
Shield
RLSD
-
J1-43
Shield
DTR/DSR
-
Twisted pair no. 10 -
-
J2-H
Shield
DTR
-
J1-44
Shield
LL/DCD
-
Twisted pair no. 11 -
-
J2-K
Shield
LT
-
J1-18
J1-17
TxD/RxD+
TxD/RxD-
Twisted pair no. 1 -
-
J2-P
J2-S
SD+
SD-
J1-28
J1-27
RxD/TxD+
RxD/TxD-
Twisted pair no. 5 -
-
J2-R
J2-T
RD+
RD-
J1-20
J1-19
TxCE/TxC+
TxCE/TxC-
Twisted pair no. 2 -
-
J2-U
J2-W
SCTE+
SCTE-
J1-26
J1-25
RxC/TxCE+
RxC/TxCE-
Twisted pair no. 4 -
-
J2-V
J2-X
SCR+
SCR-
J1-24
J1-23
TxC/RxC+
TxC/RxC-
Twisted pair no. 3 -
-
J2-Y
J2-AA
SCT+
SCT-

Arrows indicate signal direction: - indicates DTE to DCE, and - indicates DCE to DTE.

1 Any pin not referenced is not connected.

 

34 pin V.35 Cisco connector layout
34 pin V.35 Cisco connector
According to 1 reports in our database (1 positive and 0 negative) the Cisco V.35 DTE cable pinout should be correct.

Is this pinout
Cisco V.35 DTE cable visual pinout:click to enlarge
Source(s) of this and additional information: Cisco Systems, Inc.
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings