Pinouts >  Videogames connectors  >  Nintendo pinouts
12 pin SNES A/V male proprietary connector layout
12 pin SNES A/V male proprietary connector
at the SNES
Available on the newer models of Nintendo SNES
The pinout should fit 1 devices/models. Click to list>
Pin Name Description
1 R Red (Requires 200 uF in series)
2 G Green (Requires 200 uF in series)
3 CSYNC Composite Sync
4 B Blue (Requires 200 uF in series)
5 GND Ground
6 GND Ground
7 n/c Not connected
8 n/c Not connected
9 CVBS Composite Video
10 +5V +5 VDC
11 L+R Left+Right Audio (Mono)
12 L-R Left-Right Audio (Used to calculate Stereo)
Note: Pin 3 is SCART Switch voltage (+11 VDC) on PAL machines
12 pin SNES A/V female proprietary connector layout
12 pin SNES A/V female proprietary connector
at the video cable
Pinout status: +2 -0
According to 2 reports in our database (2 positive and 0 negative) the Nintendo SNES2 video connector pinout should be correct.

Is this pinout
NO DIY devices
Nintendo SNES2 video connector visual pinout:click to enlarge
Source(s) of this and additional information: Video Games FAQ (Part 3)Pinout from Radio Electronics April 1992SNES A/V Pinout at GamesX, from Hardware Book, Mark K
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings