Pinouts >  Разъемы гарнитур и наушников и т.д.  >  Apple pinouts
4 pin 3.5mm (2.5mm) plug connector layout
Разъем 4 pin 3.5mm (2.5mm) plug
iPhone headphone (handsfree)
Pin
Number
Pin
Name
Description
1 Tip Left audio
2 Ring Right audio
3 Ring Common/Ground
4 Sleeve  Microphone

Pressing the headset button shorts Microphone to Ground

Inserting a 3-pin plug into the iPhone's 4-pin receptacle would also short Mic to Common and the L/R earphones will work correctly.

Using 4-pin Headsets provided by certain Phone Carriers also work with the microphone connection and certain remote functions.

Using iPod Earphone that use a microphone with a Cell phone may not provide the mic connection, and wil likely use the phone's internal mic instead.

The iPhone requires a certain impedance on the microphone pin for the input to be detected and used.  1600ohms is a good choice as it is very close to the mic on the standard Apple headphones.  So, if you are running an output from a PC or other amplified device into the iPhone mic input you will need to put a 1.6kohm resistor in series for it to work.  Tested on iPhone 3GS.

На распиновку iPod Nano (4th, 5th Gen), iPhone (1st, 2nd, 3rd, 4th Gen), iPod Shuffle (3rd Gen), Cell Phone Connection есть 33 отзыв(а): 23 положительных и 7 отрицательных.

Эта распиновка
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings