Pinouts >  Headsets, Headphones, Handsfree - mobile phones and other equipment  >  Samsung pinouts
10 pin NEC N343i / Samsung D500 headset cell phone proprietary connector layout
10 pin NEC N343i / Samsung D500 headset cell phone proprietary connector
at the mobile phone (not sure about numbering scheme)
should be compatible with Samsung B500, C160, C240, C250, D600, D720, D730, E300, E310, E340, E350, E360, E370, E530, E610, E620, E630, E720, E730, E760, E770, E800, E810, E820, E850, E860, E880, F880, i300, i320, i750, P207, P730, P900, S341i, S342i, S400i, S410i, X210, X540, X550, X650, X660, X670, X680, X700, X800, X810, Z105, Z107, Z130, Z140, Z220, Z300, Z310, Z320i, Z500, ZV10, ZV30 and ZV50.
The pinout should fit 64 devices/models. Click to list>
Samsung SGH-E736 Pin Pin
Name		 Description
1 No connection  
2 Ground Must be joined to pin 10 to activate the headset and de-activate phone mic and speaker
3 L speaker Speaker - Left channel
4 R speaker Speaker - Right channel
5 MIC Microphone of handsfree
6 Call button  
7 Call button GND Not so sure
8 AUDIO COM  
9 MIC_N  
10 Ground Must be joined to pin 10 to activate the headset and de-activate phone mic and speaker

Call button works with ground or pin 7 but not very good, it leads to last calls menu but the next click dont do the call (this happened only once but i havent tested too much, maybe soft problem)


 

Another pinout with different numbering:

  _____
 /13579 \
 |246810|
1  GND
2  MIC_P
3  MIC_N
4  SPK_R
5  AUDIO COM
6  SPK_L
7  nc
8  nc
9  ADC
10 nc
 
Pinout status: +0 -0
According to 4 reports in our database (0 positive and 0 negative) the Samsung D500 and others headset pinout may be incorrect.

Is this pinout
NO DIY devices
Samsung D500 and others headset visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings