Pinouts >  Headsets, Headphones, Handsfree - mobile phones and other equipment  >  PalmOne pinouts
3 pin stereo plug connector layout
3 pin stereo plug connector
at the headset cabe
for PalmOne Treo 650, Treo 700w, 750v, Tungsten T5, E2, TX, 680, LifeDrive and others?
The pinout should fit 7 devices/models. Click to list>

+3V supplied to pin 3 in the standard configuration (left)

In extended configuration (rigth). Push switch to A for stereo listening. Push switch to B for phone calls. Capacitor keeps +3V from damaging earpiece. Some users reports that this capacitor not needed (and should be removed for correct function)

 
4 pin 3.5mm (2.5mm) plug connector layout
4 pin 3.5mm (2.5mm) plug connector
at the headset cable may be used?
Pinout status: +0 -2
According to 5 reports in our database (0 positive and 2 negative) the PalmOne Treo headset schematic pinout may be incorrect.

Is this pinout
NO DIY devices
Copyright © 2000-2025 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings