Pinouts of Audio / Video hardware connectors  > Alpine pinouts
Connect a 5k potentiometer between pins 2 and 6. 5k=Full Volume, 0 Ohm =Minimum Volume Note the odd pinout of a 7 pin DIN connector. Facing the amp, clockwise starting on the bottom left: 6,1,4,2,5,3,7 Pot connects to bottom left and top pins.


1   Batt   Unused
2   Bass Adjust   5K Pot to Gnd
3   CMD CLK   Unused
4   Commander Knob   Unused
5   CMD IN   Unused
6   GND   5K Pot to Bass Adjust
7   CMD OUT   Unused

    4          5

 1               3

    6          7
Facing Amp DIN Socket
7 pin unspecified connector layout
7 pin unspecified connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Alpine Bass Knob for MRD-M300 and MRD-M500 Amps visual pinout:
Alpine Bass Knob for MRD-M300 and MRD-M500 Amps diagram
click to enlarge
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.