Pinouts of Audio / Video hardware connectors  > Logitech pinouts



1 LED+  Grey 
2 IN R


3 OUT R  Red
4 OUT L  Black
5 GND (signal)  Green & Shield wire
6 ON  Connect to pin 7
7 +5V  
8 GND (amp)  Yellow & Blue
9 IN L  Purple




If the switch does not work, try to change connection between pin 7 and 1. The amplifier should turn on when there is +5V at pin 6.

Subwoofer amplifier is turned on with the sattelites, there is no separate circuit for turning the subwoofer on.



Alternative color coding:

 x-230 europe

purple > 2
yellow >3
green+shield >5
blue/black > 8
brown >9

9 pin D-SUB female connector layout
9 pin D-SUB female connector
According to 18 reports in our database (16 positive and 0 negative) this pinout should be correct.

Is this pinout
Logitech X-230 Subwoofer cable visual pinout:
Logitech X-230 Subwoofer cable diagram
click to enlarge
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.