Pinouts >  PDA, Tablet PC, MP3 players and other portable devices  >  Radar pinouts
6 pin RJ12 (6P6C) female connector layout
6 pin RJ12 (6P6C) female connector
at the Radar Detector
Cable for 12VDC, Remote Mute
The pinout should fit 1 devices/models. Click to list>
Radar Detector Pin
Name		 Radar Detector Pin
Number		 Direction Wires Pin
Number		 Wires Pin
Name		 Description
LED 1 --> 1 LED 12VDC In -> 470-Ohn -> Power LED-> Detector -> Alert LED -> 2N3904 -> 680k -> Ground & 10k ->Pin 2
12+ 2 <-- 2 12+ 12VDC Positive
GND 3 <-- 3 GND Ground
Mute 4 <-- 4 Mute Remote Mute - Use N/O Switch - Terminate after switch with 470-Ohm


There is a report that +12v is at pin 4.

Comment from Paul Gardner

 

I think where the power lines are all depends on what you are usind as the cord if you are using a standard telephone cable (rj11) with the 4 connectors I think you have the correct diagram. However if you are usind a CAT4 cable then you are still looking at the middle to wires for the power and groung but now they are pins 3 and 4

 

 

 
Pinout status: +2 -2
According to 5 reports in our database (2 positive and 2 negative) the Escort Solo S2 / Passport Radar Detector pinout may be incorrect.

Is this pinout
NO DIY devices
Escort Solo S2 / Passport Radar Detector visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings