Pinouts >  Point Of Sale Devices: scanners, printers, cash registers cables and connectors  >  Eyoyo pinouts
10 pin RJ50 (10P10C) male connector layout
10 pin RJ50 (10P10C) male connector
at the cable
This cable lets you connect the barcode reader to a computer.
Device 1
Pin Number		 Device 1
Pin Name		 Device 2
Pin Number		 Device 2
Pin Name
4 Ground 4

Ground
5 D- 2 D-
6 D+ 3 D+
7 +5V 1 +5V

Omitted pins are Not Connected.

Note It is possible to connect an RJ-45 instead of the RJ-50 but RJ45 pins start at 2 compared to RJ-50. Subtract 1 from the RJ-50 pins shown here. Pinout was determined by opening the unit and reading the silkscreen.

4 pin USB A plug connector layout
4 pin USB A plug connector
at the Computer
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings