Pinouts >  Point Of Sale Devices: scanners, printers, cash registers cables and connectors  >  PSC pinouts
10 pin RJ50 (10P10C) male connector layout
10 pin RJ50 (10P10C) male connector
at the BC-8060 base
BC-8060 cradle for cordless barcode readers i.e. Powerscan M9300. For connection via RS-232 COM port. This pinout is based on cradle's original OEM cable.

 

RJ50 Pin
Number

D-SUB Pin
Number

 Description
1 8 DCD
2 nc empty
3 nc empty
4 5 GND
5 3 RxD
6 2 TxD
7 vcc +5V (optional) "Host Power", could be used instead of main power of the cradle.*
8 nc empty
9 nc empty
10 7 CTS

*Original cable has an entry for 2.1/5.5mm standard power supply plug in it's socket. This entry accepts only 5V vcc and it has reverse polarisation. Central pin is attached to GND (-), and shield is attached to PIN7 (VCC +). Second power entry is on the cradle itself - it's also suitable for standard 2.1/5.5mm power plug, but it also have reverse polarisation and accepts higher voltage (5-30V according to manual)

9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the RS-232
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
PSC Datalogic BC-8060 10-pin RJ50 interface visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings